Note
Registering the machine identity on the Service Platform Industry.
After completion of the 2nd start-up, you are prompted to send the machine identity to the
Service Platform Industry database via the Internet.
See also
Entering machine-specific information (Page 428)
18.6.3 Making a logbook entry
Using the "New logbook entry" window to make a new entry into the logbook.
Enter your name, company and department and a brief description of the measure taken or a
description of the fault.
Note
Setting line breaks
If you wish to make line breaks in the "Fault diagnostics/measure" field, use the key
combination <ALT> + <INPUT>.
The date and entry number are automatically added.
Sorting the entries
The logbook entries are displayed numbered in the "machine logbook" window.
More recent entries are always added at the top in the display.
Procedure
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is displayed
below the machine identity data.
Note
Deleting logbook entries
Up to the completion of the 2nd commissioning, you have the option to delete the logbook
entries up to the time of the first commissioning using the "Clear" softkey.
Service and diagnostics
18.6 Logbook
SINUMERIK Operate (IM9)
438 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
