Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
2-2
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 2 A Commands
aaa accounting logsize
aaa accounting logsize
To set the size of the local accounting log file, use the aaa accounting logsize command to set the size
of the local accounting log file. To revert to the default logsize 250000 bytes, use the no form of the
command.
aaa accounting logsize integer
no aaa accounting logsize
Syntax Description
Defaults 25,0000.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows the log file size configured at 29000 bytes.
switch# config terminal
switch(config)# aaa accounting logsize 29000
Related Commands
aaa accounting Configures accounting methods
logsize Configures local accounting log file size (in bytes).
integer Sets the size limit of the local accounting log file in bytes from 0 to 250000.
Release Modification
1.0(2) This command was introduced.
2.0 This command was deprecated.
Command Description
show accounting logsize Displays the configured log size.
show accounting log Displays the entire log file.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English