Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
19-7
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 19 Q Commands
qos priority
qos priority
To configure the quality of server (QoS) priority attribute in a zone attribute group, use the qos priority
command in zone attribute configuration submode. To revert to the default, use the no form of the
command.
qos priority {high | low | medium}
no qos priority {high | low | medium}
Syntax Description
Defaults Low.
Command Modes Zone attribute configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to set the QoS priority attribute for a zone attribute group.
switch# config terminal
switch(config)# zone-attribute-group name admin-attributes vsan 10
switch(config-attribute-group)# qos priority medium
Related Commands
high Specifies high priority.
low Specifies low priority.
medium Specifies medium priority.
Release Modification
2.0(x) This command was introduced.
Command Description
show zone-attribute-group Displays zone attribute group information.
zone-attribute-group name Configures zone attribute groups.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English