Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-46
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug fcsp-mgr
debug fcsp-mgr
To enable debugging for the Fibre Channel Security Protocol (FC-SP) manager, use the debug fcsp-mgr
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general |
ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
no debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general
| ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
all Enables debugging for all FC-SP features.
critical Enables debugging of FC-SP critical errors.
datastructure Enables debugging of FC-SP data structures.
dhchap Enables debugging of DHCHAP.
error Enables debugging of FC-SP error.
event-gen Enables debugging of FC-SP event generation.
fc2 Enables debugging of FC-SP FC2 messages.
fsm Enables debugging of FC-SP events.
general Enables general debugging of FC-SP.
ha Enables debugging of FC-SP High Availability
init Enables debugging of FC-SP Initialization.
level1 Sets debugging level of FC-SP Mgr to 1.
level2 Sets debugging level of FC-SP Mgr to 2.
level3 Sets debugging level of FC-SP Mgr to 3.
level4 Sets debugging level of FC-SP Mgr to 4.
level5 Set debugging level of FC-SP Mgr to 5.
message Enables debugging of FC-SP messages.
mts Enables debugging of FC-SP MTS messages.
notify Sets debug level to notify.
trace Enables debugging of FC-SP function enter/exit.
Release Modification
1.3(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English