Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-22
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcdomain rcf-reject
fcdomain rcf-reject
To enable the RCF reject flag for a Fibre Channel or FCIP interface, use the fcdomain option. To disable
this feature, use the no form of the command.
fcdomain rcf-reject vsan number
no fcdomain rcf-reject vsan number
Syntax Description
Defaults Enabled
Command Modes Interface configuration submode
Command History
Usage Guidelines Access this command from the
switch(config-if)# submode.
Use this option to configure the RCF reject option for the selected Fibre Channel or FCIP interface.
Examples The following examples show how to configure the FCIP RCF reject fcdomain feature.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# fcdomain rcf-reject vsan 1
Related Commands
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
1.1(1a) This command was introduced.
Command Description
show fcdomain Displays global information about the FC domain configurations.
show interface fcip Displays an interface configuration for a specified FCIP interface.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English