Send documentation comments to mdsfeedback-doc@cisco.com
22-350
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show trunk protocol
show trunk protocol
To display trunk protocol status, use the show trunk protocol command.
show trunk protocol
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays trunk protocol status.
switch# show trunk protocol
Trunk protocol is enabled
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General