Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-90
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcroute
show fcroute
Use the show fcroute command to view specific information about existing Fibre Channel and FSPF
configurations.
show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id]
| summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are
included in the total number of routes.
Examples The following example displays administrative distance.
switch# show fcroute distance
Route
UUID Distance Name
---- -------- ----
10 20 RIB
22 40 FCDOMAIN
39 80 RIB-CONFIG
12 100 FSPF
17 120 FLOGI
21 140 TLPM
14 180 MCAST
64 200 RIB-TEST
distance Displays FC route preference.
label Displays label routes.
multicast Displays FC multicast routes.
summary Displays the FC routes summary.
unicast Displays FC unicast routes.
vsan vsan-id Specifies the ID of the VSAN (from 1 to 4093).
fcid-id Specifies the Fibre Channel ID.
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English