Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-351
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show user-account
show user-account
To display configured information about user accounts, use the show user-account command.
show user-account [user-name | iscsi]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays information for a specified user.
switch# show user-account user1
user:user1
this user account has no expiry date
roles:network-operator
no password set. Local login not allowed
Remote login through RADIUS is possible
The following example displays information for all users.
switch# show user-account
show user-account
user:admin
this user account has no expiry date
roles:network-admin
user:usam
expires on Sat May 31 00:00:00 2003
roles:network-admin network-operator
user:msam
this user account has no expiry date
roles:network-operator
user:user1
this user account has no expiry date
roles:network-operator
no password set. local login not allowed
Remote login through RADIUS is possible
user-name Specifies the user name.
iscsi Displays the iSCSI user account information.
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English