Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
2-25
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 2 A Commands
autonomous-fabric-id database
autonomous-fabric-id database
To configure an autonomous fabric ID (AFID) database, use the autonomous-fabric-id database
command. To remove the fabric AFID database, use the no form of the command.
autonomous-fabric-id database
no autonomous-fabric-id database
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines You must configure the IVR VSAN topology to auto mode, using the ivr vsan-topology auto command,
before you can use the autonomous-fabric-id database command to modify the database. The
autonomous-fabric-id database command also enters AFID database configuration submode.
Note In user-configured VSAN topology mode, the AFIDs are specified in the IVR VSAN topology
configuration itself and a separate AFID configuration is not needed.
Examples The following example shows how to create an AFID database and enters AFID database configuration
submode.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# autonomous-fabric-id database
switch(config-afid-db)#
Related Commands
Release Modification
2.1(1a) This command was introduced.
Command Description
ivr vsan-topology auto Configures a VSAN topology for Inter-VSAN Routing
(IVR) to auto configuration mode.
switch-wwn Configures a switch WWN in the autonomous fabric ID
(AFID) database
show autonomous-fabric-id database Displays the contents of the AFID database.
show ivr Displays IVR feature information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English