Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-54
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ip routing
ip routing
To enable the IP forwarding feature, use the ip routing command in configuration mode. To disable this
feature, use the no form of the command.
ip routing
no ip routing
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example enables the IP forwarding feature.
switch# config terminal
switch(config)# ip routing
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show ip routing Displays the IP routing state.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English