Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
5-47
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
duplicate-message throttle
duplicate-message throttle
To enable throttling of duplicate Call Home alert messages, use the duplicate-message throttle
command in Call Home configuration submode. To disable this feature, use the no form of the command.
duplicate-message throttle
no duplicate-message throttle
Syntax Description This command has no other arguments or keywords.
Defaults Enabled.
Command Modes Call Home configuration submode.
Command History
Usage Guidelines The rate of throttling is a maximum of thirty messages in 2 hours.
Examples The following example shows how to enable throttling of duplicate Call Home alert messages.
switch# config terminal
switch(config)# callhome
switch(config-callhome)# duplicate-message throttle
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English