Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-59
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug hardware arbiter
debug hardware arbiter
To configures debugging for the hardware arbiter driver, use the debug hardware arbiter command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
debug hardware arbiter {error | flow} [group number]}
no debug hardware arbiter {error | flow} [group number]}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug hardware arbiter error group
command is issued:
switch# debug hardware arbiter error group 1
Related Commands
error Enables debugging for hardware arbiter kernel errors.
flow Enables debugging for hardware arbiter kernel flow.
group number Restricts debugging to the specified group. The range is 0 to 17.
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.
show hardware Displays switch hardware inventory details.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English