Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-115
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fspf
show fspf
To display global FSPF information, use the show fspf command.
show fspf [database vsan vsan-id [detail | domain domain-id detail] | interface | vsan vsan-id
interface [fc slot/port | port-channel port-channel]]
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines If no other parameters are given, all the LSRs in the database are displayed. If more specific information
is required, then the domain number of the owner of the LSR may be given. Detail gives more detailed
information on each LSR.
database Displays the FSPF link state database.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
detail Displays detailed FSPF information.
domain domain-id Specifies the domain of the database. The range is 0 to 255.
interface Specifies the FSPF interface.
fc slot/port (Optional) Specifies the Fibre Channel interface to configure by slot and
port number on an MDS 9000 Family switch.
bay port | ext port (Optional) Specifies the Fibre Channel interface by bay or by external port
on a Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric
Switch for IBM BladeCenter. The range is 0 to 48.
port-channel
port-channel
Specifies the port channel interface. The range is 1 to 256.
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English