Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-357
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show vrrp
show vrrp
To display the VRRP configuration information, use the show vrrp command.
show vrrp [ipv6 vr group-id [interface {gigabitethernet slot/port {configuration | statistics |
status} | mgmt 0 {configuration | statistics | status} | port-channel port-channel
{configuration | statistics | status } | vsan vsan-id {configuration | statistics | status}}]] |
statistics |
vr group-id [interface {gigabitethernet slot/port {configuration | statistics | status} | mgmt
0 {configuration | statistics | status} | port-channel port-channel {configuration | statistics
| status } | vsan vsan-id {configuration | or statistics | status}}]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
ipv6 Displays IPv6 virtual router information.
vr Displays the virtual router information.
group-id Specifies the group ID. The range is 1 to 255.
interface Displays the interface type.
gigabitethernet Displays the Gigabit Ethernet interface.
slot/port Specifies the slot and port.
configuration Displays the VRRP configuration.
statistics Displays cumulative VRRP statistics.
status Displays VRRP operational status.
mgmt 0 Displays the mgmt0 interface.
port-channel Displays the Port Channel interface.
port-channel Specifies the Port Channel.
vsan Displays the VSAN interface.
vsan-id Specifies the VSAN ID.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the IPv6 option.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English