Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-363
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show wwn
show wwn
To display the status of the WWN configuration, use the show wwn command.
show wwn {status block-id number | switch | vsan-wwn}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the WWN of the switch.
switch# show wwn switch
Switch WWN is 20:01:ac:16:5e:52:00:01
The following example displays a user-configured VSAN WWN.
switch# show wwn vsan-wwn
vsan wwn configured by user
---- ----------------------
100 20:64:08:00:88:0d:5f:81
status block-id number Displays WWN usage and alarm status for a block ID. The range is 34 to
1793.
switch Displays switch WWN.
vsan-wwn Displays all user-configured VSAN WWNs.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the vsan-wwn keyword.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English