Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-294
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show santap module dvt brief
show santap module dvt brief
To display the SANTap Data Virtual Target (DVT) configuration in a brief format on the Storage Service
Module (SSM), use the show santap module dvt brief command in the EXEC mode.
show santap module dvt brief slot
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the SANTap module DVT brief infomation for slot 13.
switch# show santap module 13 dvt brief
-------------------------------------------------------------------------------
DVT WWN DVT ID MD DVT VSAN DVTIFIDX
-------------------------------------------------------------------------------
50:06:0e:80:00:c3:e0:46 139639316 3 30 0x1604000
switch# attach module 13
Attaching to module 13 ...
To exit type 'exit', to abort type '$.'
Bad terminal type: "xterm". Will assume vt100.
The following example displays the SANTap vttbl DVT configuration.
switch# attach module 2
module-3# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09
DVT Entry :
Activated : FALSE
Number LUNs : 16
Possible Hosts :
hi_pwwn = 10:00:00:00:c9:3f:90:21 : 4 LUNs
hi_pwwn = 10:00:00:00:c9:4c:c0:e5 : 2 LUNs
hi_pwwn = 21:00:00:e0:8b:0c:7d:21 : 2 LUNs
hi_pwwn = 10:00:00:00:c9:56:ed:f2 : 2 LUNs
hi_pwwn = 50:06:0b:00:00:60:2a:a0 : 4 LUNs
hi_pwwn = 21:00:00:e0:8b:92:62:92 : 2 LUNs
slot Displays SANTap configuration for a module in the specified slot.
Release Modification
3.2(1) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English