Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-5
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fabric-binding database diff
fabric-binding database diff
To view the differences between the active database and the configuration database in a VSAN, use the
fabric-binding database diff command in EXEC mode.
fabric-binding database diff {active | config} vsan vsan-id
Syntax Description
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
Examples The following example displays the differences between the active database and the configuration
database in VSAN 1.
switch# fabric-binding database diff active vsan 1
The following example displays information on the differences between the configuration database and
the active database.
switch# fabric-binding database diff config vsan 1
Related Commands
active Provides information on the differences in the active database with respect to
the configuration database.
config Provides information on information on the differences in the configuration
database with respect to the active database.
vsan vsan-id Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Release Modification
1.3(1) This command was introduced.
3.0(1) Extended support of fabric binding to Fibre Channel VSANs.
Command Description
fabric-binding copy Copies from the active to the config fabric binding database.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English