Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-15
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show callhome
show callhome
To display Call Home information configured on a switch, use the show callhome command.
show callhome [destination-profile [profile {profile | full-txt-destination | short-txt-destination
| XML-destination}] | last {action status | merge status} | pending | pending-diff |
transport-email | user-def-cmds]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured Call Home information.
switch# show callhome
callhome enabled
Callhome Information:
contact person name:who@where
contact person's email:person@place.com
contact person's phone number:310-408-4000
destination-profile Displays the Call Home destination profile information.
profile Specifies the destination profile.
profile Specifies a user-defined destination profile.
full-txt-destination Specifies the full text destination profile.
short-txt-destination Specifies the short text destination profile.
XML-destination Specifies the XML destination profile.
last action status Displays the status of the last CFS commit or discard operation.
last merge status Displays the status of the last CFS merge operation.
pending Displays the status of pending Call Home configuration.
pending-diff Displays the difference between running and pending Call Home
configurations.
transport-email Displays the Call Home e-mail transport information.
user-def-cmds Displays the CLI commands configured for each alert group.
Release Modification
1.0(2) This command was introduced.
2.0(x) Added last action status, pending, and pending-diff options.
3.0(1) Added the user-def-cmds argument.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English