Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-376
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show zoneset
show zoneset
To display the configured zone sets, use the show zoneset command.
show zoneset [[active [vsan vsan-id]] |
[brief [active [vsan vsan-id] | vsan vsan-id]] |
[name zoneset-name
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[pending [active vsan vsan-id | brief [active vsan vsan-id | vsan vsan-id] | vsan vsan-id]] |
[vsan vsan-id]] |
[pending
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[vsan
vsan-id]] |
[vsan vsan-id]]
Syntax Description
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
active Displays only active zone sets.
vsan Displays the VSAN.
vsan-id Specifies the ID of the VSAN. The range is 1 to 4093
brief Displays zone set members in a brief list.
name Displays members of a specified zone set.
zoneset-name Specifies the zone set name. The maximum is 64.
pending Displays zone sets members that are in session.
Release Modification
1.2(2) This command was modified.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English