Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-10
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcalias name
fcalias name
To configure an FC alias, use the fcalias name command. To disable an FC alias, use the no form of the
command.
fcalias name alias name vsan vsan-id
no fcalias name alias name vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To include multiple members in any alias, use the FCID, fWWN, or pWWN values.
Examples The following examples show how to configure an fcalias called AliasSample on VSAN 3.
switch# config terminal
switch(config)# fcalias name AliasSample vsan 3
switch(config-fcalias)#
Related Commands
alias-name The name of the fcalias. Maximum length is 64 characters.
vsan The fcalias is for a VSAN.
vsan-id The ID of the VSAN is from 1 to 4093.
Release Modification
1.0(2) This command was introduced.
Command Description
member (fcalias
configuration mode)
Configures alias member for a specified zone.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English