Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-40
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
snmp-server user
snmp-server user
To configure SNMP user information, use the snmp-server user command in configuration mode. To
disable the configuration or to revert to factory defaults, use the no form of the command.
snmp-server user username [group-name] [auth {md5 | sha} password [priv [password [auto |
localizedkey [auto]]] | aes-128 password [auto | localizedkey [auto] | auto | localizedkey
[auto]]] | [enforcePriv]
no snmp-server user name [group-name | auth {md5 | sha} password [priv [password [auto |
localizedkey [auto]]] | aes-128 password [auto | localizedkey [auto] | auto | localizedkey
[auto]]] | [enforcePriv]
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines The localized keys are not portable across devices as they contain information on the engine ID of the
device. If a configuration file is copied into the device, the passwords may not be set correctly if the
configuration file was generated at a different device. We recommend that passwords be explicitly
configured to the desired passwords after copying the configuration into the device.
username
Specifies the user name. Maximum length is 32 characters.
group-name Specifies role group to which the user belongs. Maximum length is 32
characters.
auth Sets authentication parameters for the user.
md5 Sets HMAC MD5 algorithm for authentication.
sha Uses HMAC SHA algorithm for authentication.
password Specifies user password. Maximum length is 64 characters.
priv Sets encryption parameters for the user.
aes-128 Sets 128-byte AES algorithm for privacy.
auto Specifies whether the user is autocreated (volatile).
localizedkey Sets passwords in localized key format.
enforcePriv Enforces privacy for the specified user.
Release Modification
1.0(2) This command was introduced.
1.0(3) Added the localizedkey option.
2.0(1b) Added the auto and aes128 options.
3.1(2) Added the enforcePriv keyword.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English