Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
27-17
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone rename
zone rename
To rename a zone, use the zone rename command in configuration mode.
zone rename current-name new-name vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to rename a zone.
switch# zone rename ZoneA ZoneB vsan 10
Related Commands
current-name Specifies the current fcalias name. Maximum length is 64 characters.
new-name Specifies the new fcalias name. Maximum length is 64 characters.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
show zone Displays zone information.
zone name Creates and configures zones.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English