Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-39
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
telnet
telnet
To log in to a host that supports Telnet, use the telnet command in EXEC mode.
telnet {hostname | ip-address} [port]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example establishes a Telnet session to the specified IP address.
switch# telnet 172.22.91.153
Trying 172.22.91.153...
Connected to 172.22.91.153.
Login:xxxxxxxx
Password:xxxxxxxxx
switch#
Related Commands
hostname Specifies a host name. Maximum length is 64 characters.
ip-address Specifies an IP address.
port (Optional) Specifies a port number. The range is 0 to 2147483647.
Release Modification
1.0(2) This command was introduced.
Command Description
telnet server enable Enables the Telnet server.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English