Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-88
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system health clear-errors
system health clear-errors
To clear previous error conditions stored in the Online Health Management System (OHMS)
application’s memory, use the system health clear-errors command.
system health clear-errors interface {fc slot/port | iscsi slot/port}
system health clear-errors module slot [battery-charger | bootflash | cache-disk | eobc | inband
| loopback | mgmt]
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description
Defaults Enabled.
Command Modes EXEC mode.
Command History
interface Specifies the interface to be configured.
fc slot/port (Optional) Configures the Fiber Channel interface on a Cisco MDS 9000
Family switch.
iscsi slot/port (Optional) Selects the iSCSI interface to configureon a Cisco MDS 9000
Family switch.
bay port | ext port (Optional) Configures the Fibre Channel interface on a port on a Cisco
Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric Switch
for IBM BladeCenter.
module slot Specifies the required module in the switch,
battery-charger Configure the OHMS battery-charger test on the specified module
bootflash Configures the OHMS bootflash test on the specified module.
cache-disk Configures the OHMS cache-disk test on the specified module.
eobc Configures the OHMS EOBC test on the specified module.
inband Configures the OHMS inband test on the specified module.
loopback Configures the OHMS loopback test on the specified module.
mgmt Configures the OHMS management port test on the specified module.
Release Modification
1.3(4) This command was introduced.
3.1(2) Added the interface bay | ext option.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English