Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-305
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sdv
show sdv
To display information about SAN device virtualization, use the show sdv command in EXEC mode.
show sdv {database [pending vsan vsan-id | vsan vsan-id] | merge status vsan vsan-id |
pending-diff vsan vsan-id | session status vsan vsan-id | statistics vsan vsan-id |
virtual-device name device-name vsan vsan-id | zone [active vsan vsan-id | vsan vsan-id]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays SDV database information.
switch# show sdv database vsan 2
virtual-device name vdev1 vsan 2
[ WWN:50:00:53:00:00:d2:e0:01 FCID:0x960001 Real-FCID:0x9f0201 ]
virtual-fcid 0x960001
pwwn 21:00:00:04:cf:cf:45:40 primary
pwwn 21:00:00:04:cf:cf:38:d6
database Displays the SDV database.
pending Displays the pending SDV database.
vsan vsan-id Specifies the number of the VSAN. The range is 1 to 4093.
merge status Displays SDV merge status.
pending-diff Displays SDV pending differences.
session Displays SDV session status.
statistics Displays SDV statistics.
virtual-device Displays SDV virtual devices.
name device-name Specifies the name of the virtual target. The maximum size is 32.
zone Specifies the zone.
active Specifies the active VSAN.
Release Modification
3.1(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English