Name: Cisco MDS 9000 Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Send documentation comments to mdsfeedback-doc@cisco.com

22-284

Cisco MDS 9000 Family Command Reference

OL-8413-07, Cisco MDS SAN-OS Release 3.x

Chapter 22 Show Commands

show running-config

To display the running configuration file, use the show running-config command

show running-config

[diff |

vsan vsan-id]

Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM

BladeCenter, the syntax differs as follows:

interface {bay port | ext port}

Syntax Description

Defaults None.

Command Modes EXEC mode.

Command History

diff Displays the difference between the running and startup configurations.

interface Displays running configuration information for a range of interfaces.

cpp Displays the virtualization interface.

fc slot/port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000

Family Switch.

bay port | ext port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124 Fabric

Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a Cisco

Fabric Switch for IBM BladeCenter.

fc-tunnel tunnel-id Displays description of the specified FC tunnel from 1 to 4095.

fcip fcip-number Displays the description of the specified FCIP interface from 1 to 255.

gigabitethernet

slot/port

Displays the description of the Gigabit Ethernet interface in the specified

slot and port.

iscsi slot/port Displays the description of the iSCSI interface in the specified slot and port.

mgmt 0 Displays the description of the management interface.

port-channel Displays the description of the PortChannel interface.

sup-fc Displays the inband interface details.

svc Displays the virtualization interface specific to the CSM module.

vsan vsan-id Displays VSAN-specific information. The ID ranges from 1 to 4093.

Release Modification

1.0(2) This command was introduced.

Cisco MDS 9000 Series Command Reference

Other manuals for Cisco MDS 9000 Series