Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
18-20
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
port-security commit
port-security commit
To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS)
distribution session in progress in the fabric, use the port-security commit command in configuration
mode.
port-security commit vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to commit changes to the active port security configuration.
switch# config terminal
switch(config)# port-security commit vsan 13
Related Commands
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
port-security distribute Enables CFS distribution for port security.
show port-security Displays port security information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English