Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-30
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tcp max-retransmissions
tcp max-retransmissions
To specify the maximum number of times a packet is retransmitted before TCP decides to close the
connection, use the tcp max-retransmissions command. Use the no form of this command to disable
this feature or revert to its factory defaults.
tcp max-retransmissions number
no tcp max-retransmissions number
Syntax Description
Defaults Enabled.
Command Modes FCIP profile configuration submode.
Command History
Usage Guidelines The default is 4 and the range is from 1 to 8 retransmissions.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
The following example specifies the maximum number of retransmissions :
switch(config-profile)# tcp max-retransmissions 6
Related Commands
number Specifies the maximum number. The range is 1 to 8.
Release Modification
1.1(1) This command was introduced.
Command Description
fcip profile Configures FCIP profile parameters.
show fcip profile Displays FCIP profile information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English