Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-183
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb session
show islb session
To display iSLB session information, use the show islb session command.
show islb session [detail | incoming | initiator initiator-node-name | iscsi slot-number | outgoing
| target target-node-name]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB session information.
switch# show islb session
Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8
Session #1
Target iqn.com.domainname.172.22.93.143.08-03.gw.22000020374b5247
VSAN 1, ISID 000000000000, Status active, no reservation
Session #2
Target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d
VSAN 1, ISID 000000000000, Status active, no reservation
Initiator iqn.1987-05.com.cisco:02.91b0ee2e8aa1.iscsi16-w2k
Session #1
Discovery session, ISID 00023d00022f, Status active
Session #2
Target iqn.com.domainname.172.22.93.143.08-03.gw.2200002037388bc2
VSAN 1, ISID 00023d000230, Status active, no reservation
detail Displays detailed iSLB session information.
incoming Displays incoming iSLB sessions.
initiator
initiator-node-name
Displays session information for a specific iSLB initiator. The maximum
size for the initiator node name is 80.
iscsi slot-port Specifies the iSCSI interface.
outgoing Displays outgoing iSLB sessions.
target Displays session information for a specific iSLB target. The maximum size
for the target node name is 80.
Release Modification
3.0(1) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English