Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
27-13
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone name (configuration mode)
zone name (configuration mode)
To create a zone, use the zone name command in configuration mode. Use the no form of the command
to negate the command or revert to the factory defaults.
zone name zone-name vsan vsan-id
attribute {broadcast | qos priority {high | low | medium} | read-only}
attribute-group group-name
member {device-alias alias-name [lun lun-id] |
domain-id domain-id port-number port-number |
fcalias name | fcid fcid-value [lun lun-id] | fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ip-address [subnet-mask] | pwwn pwwn-id [lun lun-id] |
symbolic-nodename identifier}
zone name zone-name vsan vsan-id
no attribute {broadcast | qos priority {high | low | medium} | read-only}
no attribute-group group-name
no member {device-alias alias-name [lun lun-id] |
domain-id domain-id port-number port-number |
fcalias name | fcid fcid-value [lun lun-id] | fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ip-address [subnet-mask] | pwwn pwwn-id [lun lun-id] |
symbolic-nodename identifier}
no zone name zone-name vsan vsan-id
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description zone-name Specifies the name of the zone. Maximum length is 64 characters.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
attribute (Optional) Sets zone attributes.
read-only Sets read-only attribute for the zone (default is read-write).
broadcast Sets broadcast attribute for the zone.
qos priority {high | low |
medium}
Sets QoS attribute for the zone (default is low).
attribute-group group-name Configures an attribute group. Maximum length is 64 characters.
member (Optional) Adds a member to a zone.
device-alias alias-name Adds a member using the device alias name.
lun lun-id Specifies the LUN number in hexadecimal format.
domain-id domain-id Adds a member using the domain ID.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English