Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-360
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show vsan
show vsan
To display information about configured VSAN, use the show vsan command.
show vsan [vsan-id [membership] | membership interface {fc slot/port | fcip fcip-id |
fv slot/dpp-number/fv-port | iscsi slot/port |
portchannel portchannel-number.subinterface-number}] | usage]
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
vsan vsan-id Displays information for the specified VSAN ID. The range is 1 to 4093.
membership Displays membership information.
interface Specifies the interface type.
fc slot/port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000
Family Switch.
bay | ext port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124 Fabric
Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a Cisco
Fabric Switch for IBM BladeCenter.
fcip fcip-id Specifies a FC IP interface ID. The range is 1 to 255.
fv slot/dpp-number/fv-p
ort
Specifies a virtual F port (FV port) interface in the specified slot along with
the data path processor (DPP) number and the FV port number.
iscsi slot/port Specifies the iSCSI interface in the specified slot/port on a Cisco MDS 9000
Family switch.
port-channel
portchannel-number.
subinterface-number
Specifies a PortChannel interface specified by the PortChannel number
followed by a dot (.) indicator and the subinterface number.
usage Displays VSAN usage in the system.
Release Modification
1.2(2) This command was modified.
3.1(2) Added the bay | ext interface.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English