EasyManuals Logo
Home>Cisco>Switch>MDS 9000 Series

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #574 background imageLoading...
Page #574 background image
Send documentation comments to mdsfeedback-doc@cisco.com
11-16
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
install module epld
install module epld
To upgrade the electrically programmable logical devices (EPLDs) module, use the install module epld
command. This command is only for supervisor modules, not switching modules.
install module module-number epld [bootflash: | ftp: | scp: | sftp: | tftp: | volatile:]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Issue this command from the active supervisor module to update any other module.
If you forcefully upgrade a module that is not online, all EPLDs are forcefully upgraded. If the module
is not present in the switch, an error is returned. If the module is present, the command process continues.
Do not insert or extract any modules while an EPLD upgrade or downgrade is in progress.
Examples The following example upgrades the EPLDs for the module in slot 2.
switch# install module 2 epld scp://user@10.6.16.22/users/dino/epld.img
The authenticity of host '10.6.16.22' can't be established.
RSA1 key fingerprint is 55:2e:1f:0b:18:76:24:02:c2:3b:62:dc:9b:6b:7f:b7.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.6.16.22' (RSA1) to the list of known hosts.
user@10.6.16.22's password:
epld.img 100% |*****************************| 1269 KB 00:00
Module Number 2
EPLD Curr Ver New Ver
----------------------------------------------------
Power Manager 0x06
XBUS IO 0x07 0x08
module-number Enters the number for the standby supervisor modules or any other line card.
bootflash: Source location for internal bootflash memory.
ftp Local/Remote URI containing EPLD Image.
scp Local/Remote URI containing EPLD Image.
sftp Local/Remote URI containing EPLD Image.
tftp Local/Remote URI containing EPLD Image.
volatile: Source location for the volatile file system.
Release Modification
1.2(1) This command was introduced.

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
BrandCisco
ModelMDS 9000 Series
CategorySwitch
LanguageEnglish

Related product manuals