Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-21
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug dpvm
debug dpvm
To enable debugging for dynamic port VSAN membership (DPVM), use the debug dpvm command in
EXEC mode. To disable a debug command use the no form of the command or use the no debug all
command to turn off all debugging.
debug dpvm {all | cfs-events | change-events | db-events | errors | ftrace | merge-event |
mts-events | pss-events | session-events | snmp-events | sys-events}
no debug dpvm {all | cfs-events | change-events | db-events | errors | ftrace | merge-event |
mts-events | pss-events | session-events | snmp-events | sys-events}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example displays the system output when the debug dpvm all command is issued.
switch# debug dpvm all
all Enables debugging for all DPVM.
cfs-events Enables debugging for Cisco Fabric Services (CFS).
change-events Enables debugging for change events.
db-events Enables debugging for database events.
errors Enables debugging for error.
ftrace Enables debugging for function trace.
merge-event Enables debugging for merge events.
mts-events Enables debugging for MTS events.
pss-events Enables debugging for PSS events.
session-events Enables debugging for session events.
snmp-events Enables debugging for SNMP events.
sys-events Enables debugging for system events.
Release Modification
2.0(x) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English