Send documentation comments to mdsfeedback-doc@cisco.com
27-25
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zoneset (EXEC mode)
zoneset (EXEC mode)
To merge zone set databases, use the zoneset command in EXEC mode.
zoneset {distribute | export | import interface {fc slot-number | fcip interface-number |
port-channel port-number}} vsan vsan-id
Note On a Cisco Cisco Fabric Switch for HP c-Class BladeSystem and a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
import interface {bay|ext port | port-channel port-number}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines You can also issue the zoneset import and the zoneset export commands for a range of VSANs.
distribute Distributes the full zone set in the fabric.
export Exports the zone set database to the adjacent switch on the specified
VSAN. The active zone set in this switch becomes the activated zone set
of the merged SAN.
import Imports the zone set database to the adjacent switch on the specified
interface. The active zone set in the adjacent switch becomes the activated
zone set of the merged SAN.
interface Configures the interface.
fc slot-number (Optional) Configures a Fibre Channel interface for the specified slot
number and port number on an MDS 9000 Family switch.
fcip interface-number (Optional) Selects the FCIP interface on an MDS 9000 Family switch to
configure the specified interface from 1 to 255.
interface bay|ext port (Optional) Configures a Fibre Channel interface for the specified port ona
Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric
Switch for IBM BladeCenter . The range is 0 to 48.
port-channel port-number Specifies PortChannel interface.
vsan vsan-id Merges the zone set database of a VSAN on the specified interface. The
ID of the VSAN is from 1 to 4093.
Release Modification
1.3(2) This command was introduced.
3.1(2) Added the interface bay|ext option.
To Next Page
Loading...
Need help?
General