Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
14-20
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 14 L Commands
logging server
logging server
To set message logging for the remote server, use the logging server command.
logging server [hostname | ip address severity_level | facility auth | authpriv | cron | daemon | ftp
| kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news |
syslog | user | uucp]
Syntax Description
Defaults None.
Command Modes Configuration mode.
logging server Sets message logging for remote server.
hostname Enters host name for remote server.
ip address Enters the IP address for the remote server.
severity_level Enter severity level of message.
0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
facility Facility to use when forwarding to server
auth Use auth facility
authpriv Use authpriv facility
cron Use Cron/at facility
daemon Use daemon facility
ftp Use file transfer system facility
kernel Use kernel facility
local0 Use local0 facility
local1 Use local1 facility
local2 Use local2 facility
local3 Use local3 facility
local4 Use local4 facility
local5 Use local5 facility
local6 Use local6 facility
local7 Use local7 facility
lpr Use lpr facility
mail Use mail facility
news Use USENET news facility
syslog Use syslog facility
user Use user facility
uucp Use Unix-to-Unix copy system facility

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English