Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-49
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ip domain-list
ip domain-list
To configure the IP domain list, use the ip domain-list command in configuration mode. To disable the
IP domain list, use the no form of the command.
ip domain-list domain-name
no ip domain-list domain-name
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example configures the IP domain list.
switch# config terminal
switch(config)# ip domain MyList
Related Commands
domain-name Specifies the domain name for the IP domain list. Maximum length is 80
characters.
Release Modification
1.0(2) This command was introduced.
Command Description
show ip route Displays the IP address of the default gateway.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English