Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-5
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs+ enable
tacacs+ enable
To enable TACACS+ in a switch, use the tacacs+ enable command in configuration mode. The disable
this feature, use the no form of the command.
tacacs+ enable
no tacacs+ enable
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines Further TACACS+ commands are only available when the TACACS+ feature is enabled.
Using SHA-1 as the hash algorithm may prevent RADIUS or TACACS+ usage.
Examples
switch# config terminal
switch(config)# tacacs+ enable
Related Commands
Release Modification
1.3(1) This command was introduced.
Command Description
show Displays TACACS+ server information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English