Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-86
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
iscsi import target fc
iscsi import target fc
To allow dynamic mapping of Fibre Channel targets, use the iscsi import target fc command. To disable
this feature, use the no form of the command.
iscsi import target fc
no iscsi import target fc
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines This command directs iSCSI to dynamically import all Fibre Channel targets into iSCSI.
Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example allows dynamic mapping of Fibre Channel targets.
switch# config terminal
switch(config)# iscsi import target fc
The following example disables dynamic mapping of Fibre Channel targets.
switch(config)# no iscsi import target fc
Related Commands
Release Modification
1.1(1) This command was introduced.
Command Description
show iscsi global Displays all iSCSI initiators configured by the user..

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English