Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-117
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
isns-server enable
isns-server enable
To enable the Internet Storage Name Service (iSNS) server, use the isns-server enable command in
configuration mode. To disable iSNS, use the no form of the command.
isns-server enable
no isns-server enable
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Performing the isns-server enable command enables the commands used to configure iSNS.
Examples The following example shows how to enable iSNS.
switch# config terminal
switch(config)# isns-server enable
The following example shows how to disable iSNS.
switch# config terminal
switch(config)# no isns-server enable
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
isns distribute Enables iSNS distributed support.
isns esi retries Configures ESI retry attempts.
isns profile name Creates and configures iSNS profiles.
server Configures iSNS server attributes.
show isns Displays iSNS information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English