Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
18-9
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
phone-contact
phone-contact
To configure the telephone contact number with the Call Home function, use the phone-contact
command in Call Home configuration submode. To disable this feature, use the no form of the command.
phone-contact number
no phone-contact number
Syntax Description
Defaults None.
Command Modes Call Home configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to configure the telephone contact number with the Call Home
function.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# phone-contact +1-800-123-4567
Related Commands
number (Optional) Configures the customer’s phone number. Allows up to 20
alphanumeric characters in international phone format.
Note Do not use spaces. Use the + prefix before the number.
Release Modification
1.0(2) This command was introduced.
Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English