Send documentation comments to mdsfeedback-doc@cisco.com
22-263
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show port-security
show port-security
To display configured port security feature information, use the show port-security database command.
show port-security
{database [active [vsan vsan-id]] | fwwn fwwn-id vsan vsan-id | interface {fc slot/port |
port-channel port} vsan vsan-id | vsan vsan-id] |
pending [vsan vsan-id] |
pending-diff [vsan vsan-id] |
statistics [vsan vsan-id] |
status [vsan vsan-id] |
violations [last count | vsan vsan-id]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The access information for each port can be individually displayed. If you specify the fwwn or interface
options, all devices that are paired in the active database (at that point) with the given fWWN or the
interface are displayed.
database Displays database-related port security information.
active Displays the activated database information.
vsan vsan-id Displays information for the specified database.
fwwn fwwn-id Displays information for the specified fabric WWN.
interface Displays information for an interface.
fc slot/port Displays information for the specified Fibre Channel interface.
port-channel port Displays information for the specified PortChannel interface. The range is
1 to 128.
pending Displays the server address pending configuration.
pending-diff Displays the server address pending configuration differences with the
active configuration.
statistics Displays port security statistics.
status Displays the port security status on a per VSAN basis.
violations Displays violations in the port security database.
last count Displays the last number of lines in the database. The range is 1 to 100.
Release Modification
1.2(1) This command was introduced.
2.0(x) Added the pending and pending-diff keywords.
To Next Page
Loading...
Need help?
General