Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-177
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb cfs-session status
show islb cfs-session status
To display iSCSI server load balancing (iSLB) Cisco Fabric Services information, use the show islb
command.
show islb cfs-session status
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays iSLB session information.
ips-hac2# show islb cfs-session status
last action : fabric distribute disable
last action result : success
last action failure cause : success
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show islb initiator Displays iSLB initiator information.
show islb merge status Displays iSLB merge status information.
show islb pending Displays iSLB pending configurations.
show islb pending-diff Displays iSLB pending configuration differences.
show islb session Displays iSLB session information.
show islb status Displays iSLB CFS status information.
show islb virtual-target Displays iSLB virtual target information.
show islb vrrp Display iSLB VRRP load balancing information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English