Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-32
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear counters (SAN extension N port configuration mode)
clear counters (SAN extension N port configuration mode)
To clear SAN extension tuner N port counters, use the clear counters command.
clear counters
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes SAN extension N port configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to clear SAN extension tuner N port counters.
switch# san-ext-tuner
switch(san-ext)# nWWN 10:00:00:00:00:00:00:00
switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet
1/2
switch(san-ext-nport)# clear counters
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
show san-ext-tuner Displays SAN extension tuner information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English