Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-361
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show vsan
Usage Guidelines For the show vsan membership interface command, interface information is not displayed if interfaces
are not configured on this VSAN.
The interface range must be in ascending order and non-overlapping. You can specify a range using a
hyphen and several interfaces using commas:
• The interface range format for an FC interface range is
fcslot/port - port , fcslot/port , fcslot/port
(For example,
show int fc1/1 - 3 , fc1/5 , fc2/5)
• The interface range format for an FV interface range is
fvslot/dpp/fvport - fvport , fvslot/dpp/port , fvslot/dpp/port
(For example,
show int fv2/1/1 - 3 , fv2/1/5 , fv2/2/5)
• The format for a PortChannel is
port-channel portchannel-number.subinterface-number
(For example, show int port-channel 5.1)
Examples The following examples displays configured VSAN information.
switch# show vsan 1
vsan 1 information
name:VSAN0001 state:active
interoperability mode:yes ß verify mode
loadbalancing:src-id/dst-id/oxid
operational state:up
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
switch # show vsan 1 membership
vsan 1 interfaces:
fc1/1 fc1/2 fc1/3 fc1/4 fc1/5 fc1/6 fc1/7 fc1/9
fc1/10 fc1/11 fc1/12 fc1/13 fc1/14 fc1/15 fc1/16 port-channel 99
The following example displays membership information for all VSANs.
switch # show vsan membership
vsan 1 interfaces:
fc2/16 fc2/15 fc2/14 fc2/13 fc2/12 fc2/11 fc2/10 fc2/9
fc2/8 fc2/7 fc2/6 fc2/5 fc2/4 fc2/3 fc2/2 fc2/1
fc1/16 fc1/15 fc1/14 fc1/13 fc1/12 fc1/11 fc1/10 fc1/9
fc1/7 fc1/6 fc1/5 fc1/4 fc1/3 fc1/2 fc1/1
vsan 2 interfaces:
vsan 7 interfaces:
fc1/8
vsan 100 interfaces:
vsan 4094(isolated vsan) interfaces:
The following example displays membership information for a specified interface.
switch # show vsan membership interface fc1/1
fc1/1
vsan:1
allowed list:1-4093
switch# show vsan
vsan 1 information
name:VSAN0001 state:active
interoperability mode:default

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English