Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
19-4
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 19 Q Commands
qos dwrr-q
qos dwrr-q
To associate a weight with a deficit weighted round robin (DWRR) scheduler queue, use the qos dwrr-q
command in configuration mode. To remove a previously-configured class, use the no form of the
command.
qos dwrr-q {high | low | medium} weight value
no qos dwrr-q {high | low | medium} weight value
Syntax Description
Defaults 10
Command Modes Configuration mode.
Command History
Usage Guidelines You can access this command only if you enable the QoS data traffic feature using the qos enable
command.
Examples The following example specifies the DWRR queue priority.
switch# config terminal
switch(config)# qos dwrr-q high weight 50
The following example reverts to the default value of 10.
switch(config)# no qos dwrr-q high weight 50
Related Commands
high Assigns the DWRR queue high option to DWRR queues.
low Assigns the DWRR queue low option to DWRR queues.
medium Assigns the DWRR queue medium option to DWRR queues.
weight value Specifies DWRR queue weight
Release Modification
1.3(1) This command was introduced.
Command Description
show qos Displays configured QoS information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English