Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-24
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cfs regions
show cfs regions
To display the list of distribution-enabled applications with peers in a region, use the show cfs region
command.
show cfs regions [brief [ region-id ] | name [ name app-name] | region [ region-id ] ]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows all the region information with peers.
switch# show cfs regions
Region-ID : 1
Application: callhome
Scope : Physical-all
-------------------------------------------------------------------------
Switch WWN IP Address
-------------------------------------------------------------------------
20:00:00:0d:ec:04:99:c0 10.64.66.48 [Local]
switch-
20:00:00:0d:ec:04:99:c1 10.64.66.48
switch-2.cisco.com
20:00:00:0d:ec:04:99:c2 10.64.66.48
switch-3.cisco.com
Total number of entries = 3
Region-ID : 1
Application: ntp
Scope : Physical-all
-------------------------------------------------------------------------
Switch WWN IP Address
-------------------------------------------------------------------------
20:00:00:0d:ec:06:55:c0 10.64.66.47 [Local]
switch-1
Total number of entries = 1
brief region-id Displays all configured regions and applications without peers.
name app-name Displays all peers and region information for a given application.
region region-id Displays all configured applications with peers.
Release Modification
3.2(1) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English