Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-182
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb pending-diff
show islb pending-diff
To display iSCSI server load balancing (iSLB) pending configuration differences, use the show islb
pending-diff command.
show islb pending-diff
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB pending configuration differences.
switch# show islb pending-diff
+iscsi initiator idle-timeout 10
islb initiator ip-address 10.1.1.1
+ static pWWN 23:06:00:0c:85:90:3e:82
+islb initiator ip-address 10.1.1.2
+ static nWWN 23:02:00:0c:85:90:3e:82
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show islb cfs-session
status
Displays iSLB session information.
show islb initiator Displays iSLB initiator information.
show islb merge status Displays iSLB merge status information.
show islb pending Displays iSLB pending configurations.
show islb session Displays iSLB session information.
show islb status Displays iSLB CFS status information.
show islb virtual-target Displays iSLB virtual target information.
show islb vrrp Display iSLB VRRP load balancing information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English