Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-29
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcid-last-byte
fcid-last-byte
Use the fcid-last-byte command to allocate the last byte FCID for the fabric address. To disable the
configuration or to revert to factory defaults, use the no form of the command.
fcid-last-byte last-byte-id
no fcid-last-byte last-byte-id
Syntax Description
Defaults 0
Command Modes FICON configuration submode.
Command History
Usage Guidelines This is an optional configuration. If you are not sure of the EBCDIC format to be used, we recommend
retaining the us-canada (default) option.
Examples The following example assigns the last byte FCID for the fabric address.
switch# config terminal
switch(config)# ficon vsan 2
switch(config-ficon)# fcid-last-byte 12
The following example removes the configured last byte FCID for the fabric address and reverts to the
default.
switch# config terminal
switch(config)# ficon vsan 2
switch(config-ficon)# no fcid-last-byte 3
Related Commands
last-byte-fcid Specifies the last-byte FCID range from 0 to 250.
Release Modification
1.3(1) This command was introduced.
3.0(1) This command was deprecated.
Command Description
show ficon Displays configured FICON details.
ficon vsan vsan-id Enables FICON on the specified VSAN.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English