Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-70
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
ficon vsan (configuration mode)
ficon vsan (configuration mode)
To enable the FICON feature in a specified VSAN, use the ficon vsan command in configuration mode.
To disable the feature or to revert to factory defaults, use the no form of the command.
ficon vsan vsan-id
no ficon vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines An IPL configuration file is automatically created
Once you enable FICON, you cannot disable in-order delivery, fabric binding, or static domain ID
configurations.
When you disable FICON, the FICON configuration file is also deleted.
Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example enables FICON on VSAN 2.
switch(config)# ficon vsan 2
The following example disables FICON on VSAN 6.
switch(config)# no ficon vsan 6
Related Commands
vsan vsan-id Enters the FICON configuration mode for the specified VSAN (from 1 to 4096).
Release Modification
1.3(1) This command was introduced.
Command Description
show ficon Displays configured FICON details.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English