Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-99
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
contract-id
contract-id
To configure the service contract ID of the customer with the Call Home function, use the contract-id
command in Call Home configuration submode. To disable this feature, use the no form of the command.
contract-id customer-id
no contract-id customer-id
Syntax Description
Defaults None.
Command Modes Call Home configuration submode
Command History
Usage Guidelines None.
Examples The following example shows how to configure the contract ID in the Call Home configuration.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# contract-id Customer1234
Related Commands
contract-id (Optional) Configures the service contract ID of the customer. Allows up to
64 characters for the contract number.
Release Modification
1.0(2) This command was introduced.
Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English